Oil Pleated Filter Cartridge (MFF Series)

MFF Series oil Pleated Filter Cartridge
Pleated Filter cartridges are manufactured to exact standards and are used in the most demanding industrial environments. Manufactured in a range of length options and micron ratings. Media has a fixed pore construction of high quality fibres. The combonation of surface and depth filtration provides a long lifetime. Due to use of the premium quality filter fabrics, the pleated filter cartridges have superior flow characteristics with very low pressure drop compared to depth media of similar micron rating. Due to large filter area and design, allow the use of a reduced number of cartridges. Your advantage is a smaller filter vessel, less footprint and lower capital investments. The pleated cartridges have a very large filtration area and therefore a very high dirtholding capacity. Long cartridge lifetime means lower operational condumable costs, Less work changing the cartridges and less waste.

Features:
Large filter area and depth filtration provides a long lifetime of pleated filter cartridge.
Low cost because of large filter area and reduces labor costs to change.
Specifications:
Filter Media: PP, PET, Glass Fiber
End Cap Material: PP, ABS
Center Core: PP, ABS
Netting: PE
Seal Material: Silicone, EPDM, NBR, Viton
End Cap Types: DOE, -226/Flat End
Length: 10", 20"30", 40"
Outside Diameter: 69mm
Inside Diameter: 28mm
Removal Ratings: 1μ M, 2μ M, 5μ M, 10μ M, 20μ M, 50μ M

Operating Pressure and temperature:
The pleated cartridge construction will withstand differential
Pressures up to 60psi(4bar) at ambient temperature.
The optimum changeout differential pressure is 35psi(2.5bar) up to 52temperature.
Service condition:
500kPa(5bar)by 20temperature
300kPa(3bar)by 65temperature

Applications:
Chemical
Oil & Gas Ind
metal Treatment
Process Water
Electronis
Coatings, Paint
Petroleum
Order Information:
DLMFF*#=+x(e. G., DLMFF40PP5EI = 40"PP, 5um, Seal Material: Silicone, -226/Flat End
* Refers Length(inch) # Refers Filter Media
10" PP PP
20" GF Glassfiber
30" PET Polyester
40"

=Refers Rating + Refers Seal Material
1 1um E EPDM
2 2um S Silicone
5 5um V Viton
10 10um B NBR
20 20um
50 50um
X Refers End Cap Types
I DOE
II -226/Flat End